Approximation of quantum assemblages

In this paper, we derive a set of projectors on a large Hilbert space which can universally work for approximating quantum assemblages with binary inputs and outputs. The dimension of the Hilbert space depends on the accuracy of the approximation.     

Design and performance analysis of beam steering birefringent mercurous chloride acousto-optic device

I.IntroductionThepcrformanccsofAcousto-optic(AO)dcviccareoftenlimitcdbythepropertiesofAOmcdiawhenitisusedinAOsigna1processingsystems.Thespectrumanalyzersandcorre1ationreceivers,forinstancc,areexpcctcdtoimprovcthereso1utionanddynamicrangcwhilereducingtheproccssorvolume.Rccent1y,ancwclassofmateria1s,themercurousha1ides,promiscstocontributeimportantsolutionstosuchnccdsandisrefincdtopractica1uti1izations.Themecurousha1ideweconsidcrinthispapcrismecurouschloride(Hg,C1,).Thesing1ecrystalofHg,Cl…     

Optical characterization of high speed microscanners based on static slit profiling method

Optical characterization of high-speed microscanners is a challenging task that usually requires special high speed, extremely expensive camera systems. This paper presents a novel simple method to characterize the scanned beam spot profile and size in high-speed optical scanners under operation. It allows measuring the beam profile and the spot sizes at different scanning angles. The method is analyzed theoretically and applied experimentally on the characterization of a Micro Electro Mechanical MEMS scanner operating at 2.6 kHz. The variation of the spot size versus the scanning angle, up to ±15°, is extracted and the dynamic bending curvature effect of the micromirror is predicted.     

Fast switching beam steering based on ferroelectric liquid crystal phase shutter and polarisation grating

We report on fast-switching and high-efficient optical beam steering based on a polymerisable liquid crystal polarisation grating (PG) in combination with ferroelectric liquid crystal (FLC) phase shutter. The PG was fabricated in a convenient single-step holographic exposure process using photo-sensitive azo-dye material as alignment layer for liquid crystal (LC) director. A binary electro-optical FLC was employed for circular polarisation selection, which enables the electro-tunable steering of the combined system. The efficiency of 95.7% with 82 μs switching time is obtained for 1064 nm laser. This work provides a versatile candidate for non-mechanical beam steering devices.     

直接测距型激光主动成像系统发展现状

对直接测距型激光主动成像系统进行了深入研究。按照工作方式分类介绍了国外相关研究机构激光主动成像系统的工作原理及系统参数, 归纳总结并比较分析了各工作方式的优缺点。分析认为:基于单点或小面阵探测器配合光机扫描方案可实现较远作用距离, 但其对激光器重频要求较高, 后续数据处理复杂, 且系统体积、功耗较大;而基于Flash探测器的激光主动成像系统易于实现小型化, 对激光器重频要求较低。作用距离受限问题可通过电子扫描得以有效解决。在具体应用时, 需根据实际需求, 综合考虑系统体积、质量、功耗、激光器输出峰值功率及脉冲重复频率、所能获取的探测器类型、后续数据处理能力等多种因素折衷选取。     

多环架光电稳定系统及分析

提出一种多环架高精度光电稳定系统方案。通过对其进行运动学分析，并结合伺服控制原理，证明该方案优于常规的二环架光电稳定系统。     

EXPERIMENTAL ANALYSIS OF ACTIVE STEERING HARDWARE-IN-LOOP BASED ON SLIDING MODE CONTROL 1)

为了提高重型车辆在转向过程中的稳定性和安全性,本文提出了一种基于滑模变结构控制的主动前轮转向控制策略,基于这种策略设计了主动转向控制器,建立了三轴商用车的二自由度车辆动力学简化模型及整车模型,利用TruckSim--Simulink建立联合仿真平台以及进行硬件在环实验。在不同工况、不同车速下,分别对有无主动转向控制器的车辆进行了操纵稳定性分析,并在此基础上进行了滑模变结构控制的主动转向影响因素敏感性分析。实验结果表明,这种控制器策略在不同工况下具有较强的适应性。     

Active dielectric metasurface based on phase‐change medium

We propose all‐dielectric metasurfaces that can be actively re‐configured using the phase‐change material Ge₂Sb₂Te₅ (GST) alloy. With selectively controlled phase transitions on the composing GST elements, metasurfaces can be tailored to exhibit varied functionalities. Using phase‐change GST rod as the basic building block, we have modelled metamolecules with tunable optical response when phase change occurs on select constituent GST rods. Tunable gradient metasurfaces can be realized with variable supercell period consisting of different patterns of the GST rods in their amorphous and crystalline states. Simulation results indicate a range of functions can be delivered, including multilevel signal modulating, near‐field coupling of GST rods, and anomalous reflection angle controlling. This work opens up a new space in exploring active meta‐devices with broader applications that cannot be achieved in their passive counterparts with permanent properties once fabricated.

     

旋转双棱镜光束指向控制技术综述

旋转双棱镜系统通过两棱镜的共轴独立旋转改变光的传播方向,可用于调整光束或视轴指向。与传统的两轴、三轴式光电平台相比,基于旋转双棱镜设计的光束或视轴调整装置具有精度高、结构紧凑、动态性能好等优点,已成为传统光电平台的有益补充。本文分析了双棱镜系统的光束指向调整机制;介绍了国内外相关基础研究的热点问题,主要涉及光束转向机制、光束扫描模式、棱镜回转控制以及棱镜引起的光束变形、成像色差、成像畸变的研究。文中描述了该项技术的应用进展,给出了利用该项技术开发的典型产品以及该项技术在激光光束指向调整和目标搜索、识别与跟踪成像方面的应用。最后,探讨了旋转棱镜在扫描模式、光束质量、成像色差与畸变、回转控制等方面面临的技术难题,并对其发展趋势进行了展望。     

Investigation of inverse simulation for design of feedforward controllers

This paper describes the use of inverse simulation to develop feedforward controllers for model-based output-tracking control system structures, thus avoiding the more complicated techniques of model inversion. Similarities and shortcomings of the inverse simulation and model inversion approaches are explored. It is found that, with suitable values of discretized time interval, the method based on inverse simulation may be preferable for minimum-phase systems. Depending upon zero redistribution within the process of inverse simulation, non-minimum-phase problems for linear systems can also be handled. The conclusions are demonstrated using a non-linear HS125 aircraft model, a linearised Lynx helicopter model and a container ship model for ship steering control and roll stabilization.